Keysight (Agilent) 8903E CALIBRATION and Keysight (Agilent) 8903E REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8903E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   Keysight (Agilent) 8903E   Description / Specification:    
Keysight (Agilent) 8903E Distortion Analyzer

The HP 8903E Distortion Analyzer provides unparalleled versatility and performance for audio measurements from 20 Hz to 100 kHz. The HP 8903E Distortion Analyzer is the analyzer portion of the HP 8903B Audio Analyzer. (The HP 8903E has no source.) The HP 8903E has many features which make difficult audio measurements easy. These include flexible data display formats, a selectable balanced or unbalanced input, plug-in filters, and automatic notch filter tuning. With the ratio key, you can establish a reference in % or dB and directly make frequency response and 3 dB bandwidth measurements without computation. A fully balanced analyzer input allows testing of bridged power amplifiers found in many radios and car stereos as well as professional balanced audio equipment. Distortion Residual distortion and noise (the higher of); @ 80 kHz BW: -80 dB (0.01%) or 17 uV, 20 Hz to 20 kHz. @ 500 kHz BW: -70 dB (0.032%) or 50 uV, 20 Hz to 50 kHz. 65 dB (0.056%) or 50 uV, 50 kHz to 100 kHz. Signal-to-Noise Frequency range: 50 Hz to 100 kHz. Display range: 0 to 99.99 dB. Accuracy: ± 1 dB. Options. Opt 001: Input/ output connectors on rear panel only. Opt 010 or 050: 400 Hz High-Pass filter. Opt 011 or 051: CCITT Weighting filter. Opt 012 or 052: CCIR Weighting filter. Opt 013 or 053: C-Message Weighting filter. Opt 014 or 054: CCIR/ ARM Weighting filter. Opt 015 or 055: "A" Weighting filter.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8903E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your Keysight (Agilent) 8903E CALIBRATION and/or Keysight (Agilent) 8903E Distortion Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: