BRISTOL INSTRUMENTS 428A CALIBRATION and BRISTOL INSTRUMENTS 428A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BRISTOL INSTRUMENTS 428A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Wavelength Meter?
Shop for Comparable Products on our
 used Wavelength Meter page

 
   BRISTOL INSTRUMENTS 428A   Description / Specification:    
BRISTOL INSTRUMENTS 428A Multi-Wavelength Meter

The Bristol instruments 428A Multi-Wavelength Meter combines proven Michelson interlerometer-based technology with fast Fourier transform analysis. This results in the ability to measure the wavelength and power of up to 250 discrete optical signals. Wavelength is measured to an accuracy as high as ± 0.3 pm and power is measured to an accuracy of ± 0.5 dB. In addition, the 428A system automatically calculates OSNR to greater than 40 dB. The wavelength accuracy of the 428A system is maintained over long periods of time because it is continuously calibrated with a built-in HeNe laser wavelength standard. In order to achieve the highest accuracy, the model 428A uses a single-frequency HeNe laser that is stabilized using a precise balanced longitudinal mode technique. Specifications. Optical Signal: CW and modulated. Wavelength Range: 1270 to 1650 nm (182 to 236 THz). Absolute Accuracy: ± 0.2 parts per miliion, (± 0.3 pm at 1550 nm). Differential Accuracy: ± 0.15 parts per miliion. Minimum Resolvable Seperation: 15 GHz, equal power lines input. Wavelength Display Resolution: 0.0001 nm. Power Calibration Accuracy: ± 0.5 dB, at ±30 nm from 1310 and 1550 nm. Flatness: ± 0.2 dB (1270 - 1600 nm), 30 nm from any wavelength. Linearity: ±0.3 dB (1270 - 1600 nm), lines above -30 dBm. Polarization Dependence: ± 0.5dB (1270-1600 nm). Power Display Resolution: 0.01 dB. Signal-To-Noise Ratio: > 40 dB with 100 averages, 100 GHz channel spacing; > 35 dB with 100 averages. 50 GHz channel spacing. Optical Input Signal Sensitivity Single line input: -40 dBm (1270 to 1600 nm), -30 dBm (1600 to 1650 nm). Optical Input Signal Sensitivity Multiple line input: 30 dB below total input power, but not less than single line input sensitivity. Maximum Power Displayed level: +10 dBm, sum of all lines input. Maximum Power Safe level: +18 dBm, sum of all lines input. Return Loss: 35 dB (UPC), 50 dB (APC). Maximum Number of Lines: 250. Optical Input: 9/125 um single-mode fiber (FC/UPC or FC/APC). Instrument Interface: SCPI via USB 2.0, Ethernet. and optional GPIB.



 

Standard Calibration $780.00 *
*This is a Web introductory price for one calibration of the BRISTOL INSTRUMENTS 428A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.


Please contact us for your BRISTOL INSTRUMENTS 428A CALIBRATION and/or BRISTOL INSTRUMENTS 428A Multi-Wavelength Meter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: