GIGATRONICS 80321A CALIBRATION and GIGATRONICS 80321A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the GIGATRONICS 80321A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   GIGATRONICS 80321A   Description / Specification:   Spec Sheet 
GIGATRONICS 80321A 18 GHz CW Power Sensor

The Giga-tronics 80321A 18 GHz CW Power Sensor lets you measure CW power from 10 MHz to 18 GHz at more than 1,750 readings per second over GPIB. Measure up to 87 dB with a single sensor. Measurement Capabilities. CW Power Level: –50 to +37 dBm. Frequency Range/Power Range: 10 MHz to 18 GHz (–50 to +37 dBm, CW). Maximum Power: +37 dBm (5 W). Power Linearity Frequency >8 GHz: ±0.00 dB (–50 to 0 dBm), ±0.05 dB/10 dB (0 to +37 dBm). RF Connector: Type N(m), 50 ohm. VSWR: 1.20 (0.01 - 6 GHz), 1.25 (6 - 12.4 GHz), 1.35 (12.4 - 18 GHz).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the GIGATRONICS 80321A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your GIGATRONICS 80321A CALIBRATION and/or GIGATRONICS 80321A 18 GHz CW Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: