AEROFLEX-IFR 2023 CALIBRATION and AEROFLEX-IFR 2023 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR 2023 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   AEROFLEX-IFR 2023   Description / Specification:    
AEROFLEX-IFR 2023 1.2 GHz Synthesized Signal Generator

The IFR-Aeroflex 2023 is a portable and lightweight synthesized signal generator covering the frequency range 9 kHz to 1.2 GHz. A dot matrix display with a comprehensive set of utility menus allow flexibility of operation and ease of use. The RF output can be amplitude, frequency, phase or pulse modulated. An internal programmable AF source is capable of generating simultaneous two-tone modulation. All parameters can be entered from a front panel keyboard and a rotary control can be used to adjust most settings. Microprocessor control ensures that the instruments are flexible and easy to use and allows programming by either the General Purpose Interface Bus (GPIB) or by RS-232. The GPIB is designed to IEEE Standard 488.2. The interfaces allow remote control of all functions except the supply switch, and allow the instruments to be used either manually or as part of a fully automated test system. RF output up to +13 dBm can be set by direct keyboard entry with a resolution of 0.1 dB over the entire range. For instruments fitted with the high power option, RF output is increased to +25 dBm. A carrier ON/OFF key is provided to completely disable the output. Specifications. Carrier frequency Range: 9 kHz to 1.2 GHz. Resolution: 1 Hz. Accuracy: Equal to the frequency standard accuracy. RF output Range: -140 dBm to +13 dBm ( When AM is selected the maximum RF output level decreases linearly with increasing AM depth to +7 dBm at 99.9% depth). RF output Resolution: 0.1 dB. RF output Accuracy: For output levels above -127 dBm and over a temperature range of 17 to 27°C, ±0.8 dB to 1.2 GHz. Harmonics: Typically better than -30 dBc for RF levels up to +7 dBm, Typically better than -25 dBc for RF levels up to +13 dBm. GPIB: All functions except the supply switch are remotely programmable. Option 1: No attenuator. Option 2: DC operation. Option 3: High power. Option 4: High stability frequency standard. Option 5: Rear panel connectors. Option 7: Fast pulse modulation. Option 10: 1 V peak mod input. Option 11: Fast pulse and high power. Option 100: Internal pulse generator.



 

Standard Calibration $565.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR 2023. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your AEROFLEX-IFR 2023 CALIBRATION and/or AEROFLEX-IFR 2023 1.2 GHz Synthesized Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: