AEROFLEX-IFR COM-120B CALIBRATION and AEROFLEX-IFR COM-120B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR COM-120B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   AEROFLEX-IFR COM-120B (COM120B)   Description / Specification:    
AEROFLEX-IFR COM-120B Communications Service Monitor

The IFR-Aeroflex COM-120B Communications Service Monitor offers a split screen dual display spectrum analyzer. This feature allows you to view two signals or the same signal in two different ranges simultaneously. In addition, the spectrum analyzer can be viewed along with the RF Generator or RF Receiver screens giving you full control over testing details at one glance. For RF testing professionals, the fully independent generator and receiver functions yield truer signal tracing, expanded analyzer capabilities and cross band duplex testing. In addition, the COM-120B boasts an impressive set of standard features: Digitized oscilloscope. RF and Auxiliary RF Generator. 2 µV receiver sensitivity. Frequency Selective RF Counter. RF Frequency Error Meter. FM Deviation Meter. Phase M Deviation Meter. AF Frequency Counter. AM Modulation Meter. RF Power Meter. RF Level Meter. Distortion Meter. SINAD Meter with 0 - 55 dB range. LIVE-REF and REF-LIVE on the Spectrum Analyzer and Oscilloscope, Average, peak hold and min hold can be displayed independently. The FM and Phase M Deviation Meters allow toggling of the deviation meter from the standard mode to the ± peak mode. The measurement shows the + and - peak deviation as two separate readings. Specifications. RF Signal Generator Frequency Range: 250 kHz to 999.9999 MHz. Resolution: 100 Hz. Output Level Range (T/R): -130 to -20 dBm (Simplex mode), -130 to -40 dBm (Duplex mode). Output Level Range (AUX): -130 to +13 dBm . Versions. -3, 30 kHz IF Filter. -3T, 30 kHz IF Filter with 0.01 ppm OCXO time base. -8, SSB Receive filter. -8T, SSB Receive filter with 0.01 ppm OCXO time base.



 

Standard Calibration $700.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR COM-120B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your AEROFLEX-IFR COM-120B CALIBRATION and/or AEROFLEX-IFR COM-120B Communications Service Monitor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: