INSTEK GPC-3030D CALIBRATION and INSTEK GPC-3030D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPC-3030D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK GPC-3030D   Description / Specification:    
INSTEK GPC-3030D Triple Output DC Power Supply

The GW Instek GPC-3030D is a triple output, 195W, linear DC power supply. Channel 1 and 2 are fully adjustable and Channel 3 is fixed at 5 V / 3 A with ripple and noise at less than 2 mVrms. Overload and reverse polarity protection keep it and its loads safe from unexpected conditions. The GPC-3030D features continuous or dynamic internal load selection and serial or parallel tracking for application flexibility. Specifications. DC Output CH1 / CH2: 0 to 30 V / 0 to 3 A. DC Output CH3: 5 V / 3 A Max. Operation Modes: Independent, Ch1/Ch2 Series, Ch1/Ch2 Parallel. Constant Voltage (CV) Operation Line Regulation: <= 0.01% + 3 mV. CV Operation Load Regulation: <= 0.01% + 3 mV (rating current <= 3 A) <= 0.01% + 5 mV (rating current <= 10 A). CV Ripple & Noise: <= 1 mVrms 5 Hz to 1 MHz. Constant Current (CC) Operation Line Regulation: <= 0.2% + 3 mA. CC Operation Load Regulation: <= 0.2% + 3 mA. Ripple Current: <=3 mArms. 5 V Fixed Output Line regulation: <= 5 mV. 5 V Fixed Output Load regulation: <= 10 mV. 5 V Fixed Output Ripple & Noise: <= 2 mVrms. Meter 3 1/2 digits 0.5" LED display. Meter Accuracy: ±( 0.5% of rdg + 2 digits ).



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPC-3030D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your INSTEK GPC-3030D CALIBRATION and/or INSTEK GPC-3030D Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: