INSTEK GPC-6030D CALIBRATION and INSTEK GPC-6030D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPC-6030D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK GPC-6030D   Description / Specification:    
INSTEK GPC-6030D Triple Output DC Power Supply

The GW Instek GPC-6030D is a triple output, 375W, linear DC power supply. Channel 1 and 2 are fully adjustable and Channel 3 is fixed at 5 V / 3 A with ripple and noise at less than 2 mVrms. Overload and reverse polarity protection keep it and its loads safe from unexpected conditions. The GPC-6030D features continuous or dynamic internal load selection and serial or parallel tracking for application flexibility. Specifications. DC Output CH1 / CH2: 0 to 60 V / 0 to 3 A. DC Output CH3: 5 V / 3 A Max. Operation Modes: Independent, Ch1/Ch2 Series, Ch1/Ch2 Parallel. Constant Voltage (CV) Operation Line Regulation: <= 0.01% + 3 mV. CV Operation Load Regulation: <= 0.01% + 3 mV (rating current <= 3 A) <= 0.01% + 5 mV (rating current <= 10 A). CV Ripple & Noise: <= 1 mVrms 5 Hz to 1 MHz. Constant Current (CC) Operation Line Regulation: <= 0.2% + 3 mA. CC Operation Load Regulation: <= 0.2% + 5 mA. Ripple Current: <=3 mArms. 5 V Fixed Output Line regulation: <= 5 mV. 5 V Fixed Output Load regulation: <= 10 mV. 5 V Fixed Output Ripple & Noise: <= 2 mVrms. Meter 3 1/2 digits 0.5" LED display. Meter Accuracy: ±( 0.5% of rdg + 2 digits ).



 

Standard Calibration $150.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPC-6030D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your INSTEK GPC-6030D CALIBRATION and/or INSTEK GPC-6030D Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: