INSTEK GPS-1830D REPAIR and INSTEK GPS-1830D CALIBRATION
 
Custom-Cal has a high success rate in the repair of the INSTEK GPS-1830D. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GPS-1830D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   INSTEK GPS-1830D   Description / Specification:    
INSTEK GPS-1830D 18V 3A Single Output DC Power Supply

The GW Instek GPS-1830D is a single output, 54W, linear DC power supply. It features overload and reverse polarity protection as well as high regulation and low ripple / noise that are maintained at 0.01% and < 1mVrms, respectively. Continuous or dynamic internal load selection accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device.
Specifications.

DC Output: 0 to 18 V / 0 to 3 A.
Constant Voltage (CV) Operation Line Regulation: <= 0.01% + 3 mV.
CV Operation Load Regulation: <= 0.01% + 3 mV (rating current < 3 A).
CV Ripple & Noise: <= 0.5 mVrms 5 Hz to 1 MHz.
CV Recovery Time: < 100 µS ( 50% load change, minimum load 0.5A ).
CV Output range: 0 to rating voltage continuously adjustable.
Constant Current (CC) Operation Line Regulation: <= 0.2% + 3 mA.
CC Operation Load Regulation: <= 0.2% + 3 mA.
CC Ripple Current: <=3 mArms.
CC Output Range: 0 to rating current continuously adjustable (Hi/Lo range switchable).
Meter 3 1/2 digits 0.5" LED display.
Meter Accuracy: ±( 0.5% of rdg + 2 digits).



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GPS-1830D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your INSTEK GPS-1830D REPAIR and/or INSTEK GPS-1830D 18V 3A Single Output DC Power Supply CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: