JDSU E8126VSRE CALIBRATION and JDSU E8126VSRE REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU E8126VSRE Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   JDSU E8126VSRE   Description / Specification:    
JDSU E8126VSRE 1310 / 1550 nm Very Short Range OTDR Module

The JDSU E8126VSRE Very Short Range OTDR Module helps cable operators, dark fiber providers and telecommunication service providers to characterize, maintain and troubleshoot CWDM fiber networks. The plug-in's automation and rapid testing features offer impressive time savings for companies involved in commissioning and locating faults in optical fiber. It is used with the MTS/T-BERD platforms. Technical specifications. Central Wavelength: 1310 / 1550 ± 20 nm. Pulse width: 10 ns to 10 µs. RMS Dynamic Range (Typical value corresponding to the difference (in dB) between the level of back-diffusion extrapolated at the beginning of the fiber and the RMS noise level , after 3 minutes of averaging, with the largest pulsewidth.): 32 / 30 dB. Event Dead Zone (measured at 1.5 dB below the peak of a non-saturated reflecting event at shortest pulsewidth): 2 m. Attenuation Dead Zone: 8 m. Continuous Wave Output Power: -3.5 dBm. OTDR characteristics. Distance units: Kilometers, feet and miles. Group index range. 1.30000 to 1.70000 nm in 0.00001 steps. Number of data points: up to 128 000 data points. Distance measurement: automatic or dual cursor. Display resolution: 1 cm. Cursor resolution: from 1 cm. Sampling resolution: from 4 cm. Accuracy: ±1 m ±sampling resolution, ±1.10-5 x Distance (Excluding group index uncertainties). Attenuation measurement: automatic, manual, 2-point, 5-point and LSA. Display span: from 1.25 dB to 55 dB. Display resolution: 0.001 dB. Cursor resolution: from 0.001 dB. Accuracy: ±0.05 dB ±0.05 dB/dB. Threshold: 0.01 to 5.99 dB in 0.01 dB step.



 

Standard Calibration $440.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU E8126VSRE. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your JDSU E8126VSRE CALIBRATION and/or JDSU E8126VSRE 1310 / 1550 nm Very Short Range OTDR Module REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: