JDSU RM3750+1FA2 CALIBRATION and JDSU RM3750+1FA2 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU RM3750+1FA2 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Back Reflection Meter? Shop for Comparable Products on our   new Back Reflection Meter page

 
   JDSU RM3750+1FA2   Description / Specification:    
JDSU RM3750+1FA2 Backreflection Meter

The JDSU RM3750+1FA2 is a portable, direct-display Backreflection Meter used for the convenient measurement of backreflection, insertion loss, and power of connectors, components, and systems. With a single output port, the meters are ideal for jumper manufacturers. They can be equipped with one or two built-in laser sources. Specifications. Fiber Type: 62.5/125(µm) MM. Light Source Wavelength: 1310/1550(nm) ± 10 nm. Backreflection range: 0 to -75 dB. Relative accuracy backreflection: ± 0.4 dB. Detector type: 2 mm InGaAs. Power range: 0 to -80 dBm. Absolute power accuracy: ± 0.25 dBm (typical) at -10 dBm. Relative accuracy power: ± 0.05 dB(< 5 dB loss),± 0.15 dB(> 5 dB loss). Connector Type: FC/APC.



 

Standard Calibration $415.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU RM3750+1FA2. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your JDSU RM3750+1FA2 CALIBRATION and/or JDSU RM3750+1FA2 Backreflection Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: