KEITHLEY 485 CALIBRATION and KEITHLEY 485 REPAIR
The KEITHLEY 485 is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEITHLEY 485 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our  used General Meter page

 
   KEITHLEY 485   Description / Specification:    
KEITHLEY 485 Autoranging Digital Picoammeter

The Keithley 485 Autoranging Picoammeter provides 100fA sensitivity with 4 1/2 -digit resolution in a low-cost, highly sensitive, easy-to-use instrument. The 485 measures DC current on seven ranges covering 10 decades from 100fA to 2mA. The input can withstand overloads as high as 1000V (with 100k-ohm limiting resistor). An analog output linearly converts the incoming current to voltage for hard copy output or control loop applications. The 485 has several features that facilitate measuring low current. In the AUTORANGE mode, the 485 maximizes resolution. The REL button makes readings relative to the baseline (the reading prior to touching the button). The LOG button converts the display to the logarithm (base 10) of the absolute value of the measured current. Digital calibration is performed from the front panel or over the bus. A 100-point DATA STORE buffer collects and stores measurements at one of six automatic reading rates from three per second to one per hour, or manually with the STORE button. Minimum and maximum readings are continuously updated at three per second in the DATA STORE mode. Display: 41/2-digit LCD, 0.5 in height; polarity, range, and status indication. Measures from 2 nA to 2 mA full scale with a 1 year accuracy of ±(0.4% + 4 counts) on the 2 nA range (worst case). Manual or autoranging. Analog output (+1 V = -10000 counts, except +100 mV on 2 nA range). DC voltage input 50V to 350V.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEITHLEY 485. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your KEITHLEY 485 CALIBRATION and/or KEITHLEY 485 Autoranging Digital Picoammeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: