KEITHLEY 2510 REPAIR and KEITHLEY 2510 CALIBRATION

The KEITHLEY 2510 is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the KEITHLEY 2510. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the KEITHLEY 2510 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our
 used General Meter page

 
   KEITHLEY 2510   Description / Specification:    
KEITHLEY 2510 TEC SourceMeter

The Keithley 2510 TEC SourceMeter instrument enhances Keithley's CW (Continuous Wave) test solution for high speed LIV (lightcurrent- voltage) testing of laser diode modules. These 50W bipolar instruments were developed in close cooperation with leading manufacturers of laser diode modules for fiberoptic telecommunications networks. Designed to ensure tight temperature control for the device under test, the Keithley 2510 was the first in a line of highly specialized instruments created for telecommunications laser diode testing. It brings together Keithley's expertise in high speed DC sourcing and measurement with the ability to control the operation of a laser diode module's Thermo- Electric Cooler or TEC (sometimes called a Peltier device) accurately. Specifications: 50W TEC Controller combined with DC measurement functions. Fully digital P-I-D control. Designed to control temperature during laser diode module testing. Wide temperature setpoint range (-50°C to +225°C) and high setpoint resolution (±0.001°C) and stability (±0.005°C). Compatible with a variety of temperature sensor inputs - thermistors, RTDs, and IC sensors. Maintains constant temperature, current, voltage, and sensor resistance. AC Ohms measurement function verifies integrity of TEC. Measures and displays TEC parameters during the control cycle. 4-wire open/short lead detection for thermal feedback element IEEE-488 and RS-232 interfaces.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the KEITHLEY 2510. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your KEITHLEY 2510 REPAIR and/or KEITHLEY 2510 TEC SourceMeter CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: