NEWPORT 8350 CALIBRATION and NEWPORT 8350 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NEWPORT 8350 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another TEC Temperature Controller?
Shop for Comparable Products on our  used TEC Temperature Controller page

 
   NEWPORT 8350   Description / Specification:    
NEWPORT 8350 5 A / 8 V Temperature Controller (TEC) Module

The Newport 8350 is a 5A/8V 40W Temperature Controller (TEC) Module. Specifications. TEC Output; Maximum Current: 5 Amps. Maximum Voltage: 8 Volts. Typical Power: 40 Watts. TE Current Resolution: 0.153 mA. TE Current Accuracy (mA): ± (0.02 % set point + 4 mA). Current Limit; Range: 0 to 5 Amps. Accuracy: ± 20 mA. Ripple/Noise (rms):. < 1 mA. Short Term Stability (1 hour, 30°C): 17 ppm. Long Term Stability (24 hour, 30°C): 33 ppm. Temperature Coefficient (°C/°C): < 0.05. Display Range; Temperature: -100.00°C to +240.00°C. Resistance (10 µA) 0.01 k-ohm to 495.000 k-ohm. Resistance (100 µA): 0.001 k-ohm to 49.500 k-ohm. Resistance (RTD): 20 ohm to 192 ohm. LM335 Voltage: 2331 mV to 3731 mV. AD590 Current: 248.15 µA to 378.15 µA. TE Current: ± 5.00 Amps. Display Resolution; Temperature: 0.01°C. Resistance (10 µA): 10 ohm. Resistance (100 µA): 1 ohm. Resistance (RTD): 0.01 ohm. LM335 Voltage: 0.1 mV. AD590 Current: 0.01 µA. TE Current: 1 mA. Display Accuracy (± (% of reading + fixed error)); Temperature: ± 0.1 °C. Resistance (10 µA): ± (0.04% + 16 ohm). Resistance (100 µA): ± (0.05% + 8 ohm). Resistance (RTD): ± (0.03% + 50 m-ohm). LM335 Voltage: ± (0.09% + 1 m V). AD590 Current: ± (0.005% + 0.5 uA). TE Current: ± (0.09% + 2 mA).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NEWPORT 8350. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your NEWPORT 8350 CALIBRATION and/or NEWPORT 8350 5 A / 8 V Temperature Controller (TEC) Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: