|
|
The Philips PM 5193 Synthesized Function Generator offers complete versatility of performance, and a wide array of features. Frequency range has an exceptional 11 1 /2-decade coverage and setting accuracy of better than 0.1 mHz. Function selection, with a choice of eight waveforms that includes sine, square, ramps and haversine, plus a built-in pulse generator for positive and negative pulses with 3 ns transition times. Modulation, with AM, FM, gating and counted burst with programmable single-shot or continuous operation, and programmable internal (to 200 kHz), or external modulation. Sweep facilities, with linear and logarithmic sweep and three sweep modes, which can be controlled internally (single or continuous) or by an external trigger. Specifications. Nominal Range: 0.1 mHz to 50 MHz. Resolution: 8 digits; >0.1 mHz. Display: 8-digit LED display, Hz/kHz indication. Setting Error: < 1 x 10^-6. Frequency Jitter: 0.02%, <1200 Hz; f >= 2 MHz, LF bandwidth 10Hz to 20 kHz. Output Connector: BNC socket on front or rear panel. Output Impedance: Zo = 50 ohm. Output Load Capability: Short-circuit proof. Output Maximum External Voltage: ±12V p-p (<3 min.). Waveform Standard Functions: Sinewave, squarewave, triangle, haversine, sawtooth (positive-and negative-going ramps), positive and negative pulse. Modulation Modes: AM int / text, FM int / ext, lin/log sweep, gate int / ext, burst. Internal modulation frequency programmable via keypad.
|