ROHDE & SCHWARZ FSH6.06 CALIBRATION and ROHDE & SCHWARZ FSH6.06 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSH6.06 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSH6.06 (1145.5850.06)   Description / Specification:    
ROHDE & SCHWARZ FSH6.06 6 GHz Handheld Spectrum Analyzer w/ Preamplifier

The R&S FSH6.06 (1145.5850.06) 6 GHz Handheld Spectrum Analyzer is ideal for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service – an extensive range of applications. The R&S FSH6.06 comes with an adjustable preamplifier, making it suitable for measuring very small signals. By means of the TDMA POWER function, the FSH3 performs time-domain power measurements within a timeslot of TDMA (time division multiple access) methods. Specifications. Frequency range: 100 kHz to 6 GHz. Resolution: 1 Hz. Counter accuracy: S/N > 25 dB ± (frequency × reference frequency error). Resolution bandwidths: 100, 300 Hz, 1, 3, 10, 30, 100, 200, 300 kHz, 1 MHz. Video bandwidths: 10 Hz to 1 MHz. Displayed average noise level: typ. –135 dBm (100 Hz). TOI: typ. 13 dBm. SSB phase noise: <–100 dBc (1 Hz) at 100 kHz from carrier. Detectors: sample, max/min peak, auto peak, RMS. Level measurement uncertainty: <1.5 dB, typ. 0.5 dB. Reference level: –80 dBm to +20 dBm. Interfaces: RS-232-C optical interface. Options. FSH-B1 (1145.5750.02), Distance-to-Fault Measurement. FSH-K1 (1157.3458.02), Remote Control via RS-232-C. FSH-K2 (1157.3387.02), Vector Transmission and Reflection Measurements. FSH-K3 1157.3429.02), Receiver Mode.



 

Standard Calibration $735.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSH6.06. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.


Please contact us for your ROHDE & SCHWARZ FSH6.06 CALIBRATION and/or ROHDE & SCHWARZ FSH6.06 6 GHz Handheld Spectrum Analyzer w/ Preamplifier REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: