SORENSEN DCS300-3.5E CALIBRATION and SORENSEN DCS300-3.5E REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS300-3.5E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   SORENSEN DCS300-3.5E   Description / Specification:    
SORENSEN DCS300-3.5E 300V 3.5A Single Output DC Power Supply

The Sorensen DCS300-3.5E DC System Power Supply is designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size. An automatic crossover system enables the unit to switch operating modes in response to varying load requirements. Features. Simultaneous digital display of both voltage and current. Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output. Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage. Remote sensing to compensate for losses in power leads. Remote voltage, resistive, current limit and OVP programming with selectable programming constants. Optional IEEE-488 interface for complete remote programming and readback capability. Specifications. Output Voltage: 0 to 300 V. Output Current: 0 to 3.5 A. Output Power: 1050 W. Line Regulation Voltage: 300 mV. Line Regulation Current: 3.5 mA. Load Regulation Voltage: 300 mV. Load Regulation Current: 3.5 mA. Meter Accuracy Voltage: 4.0 V. Meter Accuracy Current: 0.045 A. OVP Adjustment Range: 15 to 330 V. Output Noise and Ripple (V) (20 Hz - 20 MHz): Rms 40 mV, p-p 200 mV. Stability Voltage: 150 mV. Stability Current: 1.75 mA. Temperature Coefficient Voltage: 60 mV/°C. Temperature Coefficient Current: 1.05 mA/°C. Maximum Remote Sense Line Drop Compensation/line: 1 V.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS300-3.5E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your SORENSEN DCS300-3.5E CALIBRATION and/or SORENSEN DCS300-3.5E 300V 3.5A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: