SORENSEN DCS40-25 CALIBRATION and SORENSEN DCS40-25 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS40-25 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   SORENSEN DCS40-25   Description / Specification:    
SORENSEN DCS40-25 40V 25A Single Output DC Power Supply

The Sorensen DCS40-25 1000 watt programmable power supply incorporates current mode switching rates up to 100 kHz in high power density, low profile packages. Utilizing state-of-the-art technology and unique packaging techniques, the DCS40-25 provides continuous full output power (1 kW) in any volt/amp combination within the rated output voltage and current limits. Options include an internal IEEE-488/RS-232 interface and isolated analog programming of voltage or current. Specifications. Output Voltage: 0 to 40 V. Output Current: 0 to 25 A. Output Power: 1000 W. Regulation Line and Load: 0.2%. Constant Voltage Mode Ripple (PARD): 10 mV rms. Constant Voltage Mode Resolution: 0.02%. Constant Voltage Mode Transient Response Time (Typ.): 500 µs. Temperature Coefficient Voltage (Typ.): 0.02 % C. Voltage Drift (Typ.): 0.05% V max. Constant Current Mode Regulation Line and Load: 0.2%. Constant Current Mode Ripple (PARD): 7 mA rms. Constant Current Mode Resolution (Typ.): 0.02%. Temperature Coefficient Current (Typ.): 0.03 % C. Current Drift (Typ.): 0.05% V max. Transient Response: < 1 ms recovery to 1 % band for 30% step load change (70- 100% or 100-70%) 500 µs typical. Stability: 0. 5% drift max over 8 hrs. with constant line, load and temperature, following 20 minute warm-up. Options. M51: Isolated programming control of either the output current or voltage using analog signals that can be biased up to 600V relative to the supply's return line. M85: Slave multichannel interface control.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS40-25. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your SORENSEN DCS40-25 CALIBRATION and/or SORENSEN DCS40-25 40V 25A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: