TEKTRONIX TDS 680C CALIBRATION and TEKTRONIX TDS 680C REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX TDS 680C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope?
Shop for Comparable Products on our  used Oscilloscope page

 
   TEKTRONIX TDS 680C   Description / Specification:    
TEKTRONIX TDS 680C

3 GHz Digital Storage Oscilloscope. Total Channels: 4. Sample Rate ( all channels simultaneously): 10 GS/s. Time Bases: Main and delayed. Time/div Range: 100 ps/div to 10 s/div. Time Base Accuracy: Over any interval> 1 ms ± 10 ppm. Time Interval Measurement Accuracy : ±[(0.15/sample rate) + (10 ppm x |Reading|] single shot. ( 15 ps @ 10 GS/s). Record Length per Channel: 500 to 30,000 pts. (optional: 120,000 pts.) Trigger Jitter: 8 ps RMS (typical). Pre-Trigger Position: 0% to 100% of record. Channel to Channel Deskew Range: ±25 ns. Vertical Resolution: 8-Bits (> 11 -Bits with averaging). Vertical Sensitivity: 10 mV/div to 1 V/div. Maximum Input Voltage: 5 V RMS. DC Gain Accuracy: ±1.0%. Position Range: ±5 divs. Offset: ±0.5 V from 10 to 50 mV/div, ±0.25 V from 50.5 to 100 mV/div, ±5 V from 101 mV to 500 mV/div, ±2.5 V from 505 mV to 1 V/div. Bandwidth Selections: Full only. Input Impedance Selections: 50 ohm (DC coupled). Input Coupling: DC or GND. Color CRT Monitor 7 in. diagonal NuColor"' liquid crystal full-color shutter, 256 levels.



 

Standard Calibration $375.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX TDS 680C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your TEKTRONIX TDS 680C CALIBRATION and/or TEKTRONIX TDS 680C REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: