TEKTRONIX ST2400 REPAIR and TEKTRONIX ST2400 CALIBRATION
The TEKTRONIX ST2400 is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the TEKTRONIX ST2400. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX ST2400 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   TEKTRONIX ST2400   Description / Specification:   Spec Sheet 
TEKTRONIX ST2400 STM-16 2.4 Gbit/s SDH / SONET Test Set

The Tektronix ST2400 STM-16 2.4 Gbit/s SDH/SONET Test Set allows you to upgrade your existing SDH test capabilities to 2.4 Gbit/s. It's the first truly compact, lightweight, and cost-effective STM-16 test set available. The ST2400 is payloadindependent; VC-3, VC-4, VC-4-4c, VT-12, and any other mapping are all supported from an external SDH test set. The ST2400 Transceiver features three operating modes to provide the flexibility you need to test today's advanced STM-16 and Wavelength Division Multiplexing (WDM) systems. The ST2400 also provides very cost-effective testing for STM-64 systems and is switchable for SONET capabilities. Three Test Modes; Active Through Mode. Allows overhead bytes to be overwritten while regenerating the received STM-16 payload. Defects and errors can also be added to the received signal prior to retransmission. You can set defects and errors continuously, single-shot, or repetitively with variable duration and repetition interval. This mode is especially valuable for testing framing synchronisation and protection switching, and for diagnosing system interoperability problems. Terminal (External) Mode. Allows out-of-service tests to be performed. Using any external STM-1 or STM-4 SDH test set, the ST2400 performs STM-16 level testing while the external test set analyses the dropped tributaries. Previous investment in test equipment is preserved. Standalone (Internal) Mode. Where payload testing is not required, or an external STM-16 signal is not available, the ST2400 can operate independently. An internally-generated 2.4 Gbit/s test signal provides full error performance analysis and reporting at the STM-16 level. Features. 155 electrical / 155/622 optical add/drop payload capability. Dual wavelength available with option for hybrid networks. Easily switchable to SONET OC-48. Special 1550 ±10 nm optics for WDM applications. Standalone mode provides STM-16 signal testing without additional test equipment Payload independent. Active through mode to simulate fault conditions on installed networks. Options. Opt. 11: Receive only with 2.4 Gbit/s wideband optics. Opt. 12: Transmit only with 1310 nm intermediate-reach 2.4 Gbit/s transmit optics. Opt. 13: Transceiver with wideband receive optics and 1310 nm intermediate-reach 2.4 Gbit/s transmit optics. Opt. 14: Transmit only with 1550 nm long-reach 2.4 Gbit/s transmit optics. Opt. 15: Transceiver with wideband receive optics and 1550 nm long-reach 2.4 Gbit/s transmit optics. Opt. 16: Transmit only with switchable 1310 nm intermediate-reach transmit optics and 1550 nm long-reach 2.4 Gbit/s transmit optics. Opt. 17: Transceiver with wideband receive optics and switchable 1310 nm intermediate-reach transmit optics and 1550 nm long-reach 2.4 Gbit/s transmit optics. Opt. 1A: 15 dBm FC-PC attenuator for 2.4 Gbit/s receiver. Opt. 1M: Rackmount. Opt. 3C: Replace FC fiber-optic connectors with SC connectors. Opt. 4C: Replace FC fiber-optic connectors with ST connectors.



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX ST2400. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Optical Time Domain Reflectometer (OTDR)
Optical Time Domain Reflectometer (OTDR) is a device for characterizing a fiber wherein an optical pulse is transmitted through the fiber and the resulting backscatter and reflections to the input are measured as a function of time. Useful in estimating attenuation coefficient as a function of distance and identifying defects and other localized losses.

Synchronous Transport Module (STM)
STM-1 (Synchronous Transport Module level-1) is the SDH ITU-T fiber optic network transmission standard. It has a bit rate of 155.52 Mbit/s. Other levels are STM-4, STM-16 and STM-64.

Please contact us for your TEKTRONIX ST2400 REPAIR and/or TEKTRONIX ST2400 STM-16 2.4 Gbit/s SDH / SONET Test Set CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: