TEKTRONIX PS280 CALIBRATION and TEKTRONIX PS280 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX PS280 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   TEKTRONIX PS280   Description / Specification:    
TEKTRONIX PS280 Triple Output DC Power Supply

The Tektronix PS280 Triple Output DC power supply is a multifunction benchtop or portable instrument. It is a regulated power supply that provides fixed 5 V output for powering logic circuits and two variable outputs for a wide range of test and experimental uses. Characteristics. Output 1: 0 to 30 VDC, 0 to 2.0A (CC). Output 2: 0 to 30 VDC, 0 to 2.0A (CC). Output 3: 5.0 VDC (Fixed), 3.0 A max (foldback Iimited). Line Regulation: Two Variable: 0.01% + 3 mV (CV); 0.2% + 3 mA (CC), One Fixed: <= 5 mV (CV). Load Regulation: Two Variable: <= 0.01% + 5 mV, current > 3 A (CV); <= 300mV, 0 to 60 V single series tracking supply (CV), 0.2% + 3 mA (CC). One Fixed: <= 10 mV (CV). Ripple/Noise: Two Variable:<= 1 mV RMS, 5 Hz to 1 MHz (CV); <= 3 mA (CC). One Fixed: <= 2 mV RMS. Output in Independent Mode: Two variable 0 to 30 V (CV); 2.0 A (CC). Output in Parallel Mode: One 0 to 30 V, 4.0 A max; Tracking Error: <= 0.5% - 10mV. Series Mode: One 0 ±30 V, 2.0 A max or one 60 V, 2 A; Tracking Error: <= 0.5% - 10mV. Displays: Two 3-1/2 digit LED (switchable).



 

Standard Calibration $345.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX PS280. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your TEKTRONIX PS280 CALIBRATION and/or TEKTRONIX PS280 Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: