TEKTRONIX TAP2500 CALIBRATION and TEKTRONIX TAP2500 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the TEKTRONIX TAP2500 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our  used Oscilloscope Accessory page

 
   TEKTRONIX TAP2500   Description / Specification:    
TEKTRONIX TAP2500 2.5 GHz, 10X Active FET Probe

The Tektronix TAP2500 is a 2.5 GHz, 10X active FET probe with less than 1 pF input capacitance provides truer signal reproduction and fidelity for high-frequency measurements. It is designed for use and direct connection to oscilloscopes with the TekVPI™ probe interface.
Specifications.

Attenuation: 10x.
Rise Time (probe only): <140 ps.

Characteristics.
Bandwidth (probe only): ≥2.5 GHz.
Input Capacitance: ≤0.8 pF.
Input Resistance: 40 kΩ.
Input dynamic range: ±4.0 V.
Input offset range: ±10 V.
Maximum non-destructive input voltage: ±30 V (DC + peak AC).
Propagation delay: 5.3 ns.



 

Standard Calibration $90.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the TEKTRONIX TAP2500. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your TEKTRONIX TAP2500 CALIBRATION and/or TEKTRONIX TAP2500 2.5 GHz, 10X Active FET Probe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: