NEWPORT 3150 CALIBRATION and NEWPORT 3150 REPAIR
The NEWPORT 3150 is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NEWPORT 3150 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another TEC Temperature Controller?
Shop for Comparable Products on our  used TEC Temperature Controller page

 
   NEWPORT 3150   Description / Specification:    
NEWPORT 3150 350 Watt Temperature Controller

The Newport 3150 Temperature Controller is a precision thermoelectric cooler controller. It is Operational with most thermistors, IC and RTD temperature sensors. A high power 7W2 female D-connector is used for input and output connections. Specifications. TEC Output; Maximum Current / Voltage: 15 Amps at 23 Volts or 12.5 Amps at 28 Volts. Maximum Power: 350 Watts. TE Current Resolution: 0.458 mA. TE Current Accuracy (mA): ± (3 % set point + 50 mA). Current Limit Range: 0 to 15 Amps. Accuracy: ± 150 mA. Ripple/Noise (rms): < 10 mA. Short Term Stability (1 hour): < 0.0005 °C. Long Term Stability (24 hour): < 0.001 °C. Temperature Coefficient (°C/°C): < 0.05. Display Range Temperature: -100.00°C to +240.00°C. Display Range Resistance (10 µA) 0.01 k-ohm to 495.000 k-ohm. Display Range TE Current: ± 15.00 Amps. Display Range TE Voltage: 0.0 to 30.0 Volts. Resolution Temperature: 0.01°C. Resolution Resistance (10 µA): 10 ohm. Resolution TE Current: 10 mA. Resolution TE Voltage: 0.1 Volts. Accuracy Temperature: ± 0.1 °C. Resistance (10 µA): ± (0.04% + 16 ohm). TE Current: ± (0.25% + 30 mA). TE Voltage: ± (0.005% + 100 mV). Display Type: LCD character display, 4 lines by 20 characters.



 

Standard Calibration $460.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NEWPORT 3150. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your NEWPORT 3150 CALIBRATION and/or NEWPORT 3150 350 Watt Temperature Controller REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: