EXFO IQ-206 REPAIR and EXFO IQ-206 CALIBRATION

 
Custom-Cal has a high success rate in the repair of the EXFO IQ-206. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO IQ-206 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our
 used Lightwave Measurement System page or new Lightwave Measurement System page

 
   EXFO IQ-206   Description / Specification:    
EXFO IQ-206 Optical Test System Expansion Unit

The Exfo IQ-206 Optical Test System Expansion Unit, includes top-of-the-line scalable hardware such as a modular platform, expansion units and a complete range of plug-in test modules. The IQ test modules cover the optical T&M spectrum, from simple insertion loss testers all the way up to sophisticated PMD analyzers. You get all this in a system that is up to speed for comprehensive test result analysis and that is mobilized for GPIB and network communications. The Exfo IQ-203 is used to control the Exfo IQ-206. The test modules include; Power Meters: IQ-1100 Power Meter, IQ-1200 4-Channel Power Meter, IQ-1500 Calibration Power Meter, IQ-1600 High-Speed Power Meter. Light Sources: IQ-2100 Light Source, IQ-2300 ASE Broadband Source, IQ-2400 WDM Laser Source, IQ-2600B Tunable Laser Source. Test: IQ-3100 Variable Attenuator, IQ-3200 Return Loss Meter, IQ-3300 Variable Reflector, IQ-3400 PDL/OL Meter, IQ-5100 Polarization Controller, IQ-5240 Optical Spectrum Analyzer, IQ-5310 Wavelength Meter, IQ-5320 Multi-Wavelength Meter, IQ-5500 PMD Analyzer, IQ-6100 EDFA, IQ-7000 OTDR Series, IQ-9100 Optical Switch and IQ-9600 Utility Modules. Options. E1: PC-206 expansion card with 21/2 ft. cable (ISA). E2: PC-206 expansion card with 5 ft. cable (ISA). E3: PC-206 expansion card with 21/2 ft. cable (PCI). E4: PC-206 expansion card with 5 ft. cable (PCI).



 

Functional Test $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO IQ-206. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.


Please contact us for your EXFO IQ-206 REPAIR and/or EXFO IQ-206 Optical Test System Expansion Unit CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: