ILX LIGHTWAVE FOM-7900B REPAIR and ILX LIGHTWAVE FOM-7900B CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ILX LIGHTWAVE FOM-7900B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE FOM-7900B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our  used Lightwave Measurement System page or new Lightwave Measurement System page

 
   ILX LIGHTWAVE FOM-7900B (7900B)   Description / Specification:    
ILX LIGHTWAVE FOM-7900B Multi-Channel Fiber Optic Test System

The ILX Lightwave FOM-7900B Multi-Channel Fiber Optic Test System supports up to eight modules of stabilized DFB or Fabry Perot laser sources, fiber optic switches or dual power meters. All are controlled from a single user interface. The mainframe and modules can be controlled by a GPIB/IEEE-488.2 or RS-232 interface. Up to twenty-five FOM-7900B Systems can be linked to control up to 200 channels from one GPIB address.
Specifications.

Internal Modulation;
Waveform: Square Wave.
Frequency: 1 to 500 kHz.
Duty Cycle: 50% ± 1%.
Modulation Depth: 100%.
Rise/Fall time: < 250 ns.
Channel to Channel Synchronization: <100 ns.

Modulation In;
Level: TTL.
Frequency: 1 to 500 kHz.
Duty Cycle: 50% ±1%.
Polarity: 0 volts = Laser turned OFF, +5 volts = Laser turned ON.
Optical Delay: <1µs.

Channel to Channel;
Synchronization: <100ns.
Jitter: <50ns.
Connector: BNC female on back panel.

External Trigger Input/Output;

Level: TTL, Active Low.
Pulse Width: 100 ns minimum.
Connector: BNC female on rear panel.
Computer Interface: GPIB/IEEE-488.2



 

Standard Calibration $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE FOM-7900B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ILX LIGHTWAVE FOM-7900B REPAIR and/or ILX LIGHTWAVE FOM-7900B Multi-Channel Fiber Optic Test System CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: