SANTEC TSL-210 REPAIR and SANTEC TSL-210 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the SANTEC TSL-210. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SANTEC TSL-210 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our  used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   SANTEC TSL-210   Description / Specification:    
SANTEC TSL-210 1530 to 1610 nm Tunable Laser Source

The Santec TSL-210 is an external cavity tunable semiconductor laser designed so that the user can easily tune wavelength and optical output power. Santec designed the TSL-210 to meet this need with a unit that has precise wavelength tuning accuracy, excellent wavelength and power stability, and high optical output power. The unit also has many other features including full control through electronic interface (GPIB, RS-232, LabVIEW), ability to fix a constant power output across all wavelengths, a coherence control to change linewidth, as well as many additional optional features. Specifications: Wavelength Tuning range: 1530 to 1610 nm. Minimum tuning: 80 nm. Resolution: 0.01 nm (<0.001nm When using fine tuning). Accuracy: 0.1 nm. Repeatability: 0.05 nm (Number of times of measurement n=50, Measured at center wavelength). Stability: 0.01 nm (1 hour, Measured at center wavelength). Fine tuning range: 10 GHz, 0.08 nm (typ). Tuning speed: 170 ms/nm. Maximum output power: 8 mW. Accuracy: 8 %. Repeatability: 0.01 dB (Number of times of measurement n=50, Measured at center wavelength, +6dBm). Stability: 0.01 dB (1 hour, Measured at center wavelength, +6dBm). Flatness: 0.2 dB (Measured at +6dBm). Spectrum line width Max: 1 MHz (Coherence control OFF). Modulation range: 0 to 10 kHz (Measured at -3dBm). Optical connector: FC. Optical fiber: SM, 10/125-UV/UV-250.



 

Standard Calibration $480.00 *
*This is a Web introductory price for one calibration of the SANTEC TSL-210. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your SANTEC TSL-210 REPAIR and/or SANTEC TSL-210 1530 to 1610 nm Tunable Laser Source CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: