FLUKE 185 CALIBRATION and FLUKE 185 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 185 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 185   Description / Specification:    
FLUKE 185 Handheld True RMS Digital Multimeter

The Fluke 185 is a Handheld True RMS Digital Multimeter featuring AC+DC true RMS measurements, 50.000 counts resolution and a 0.05% basic DC accuracy. The extra large dual display with analog bar graph and backlight ensure that readings are easy to read under all circumstances. The unit offers measurements of dB, temperature, a 4-20mA process loop percentage readout, min-max-average recording with timestamp, up to 30 readings, memories and a computer interface. The computer interface can also be used to perform closed case calibration and when the batteries run down you do not have to open the complete case and break the calibration seal to exchange them.
Specifications.

Voltage DC.
  Max: 1000 V.
  Max Resolution: 1 µV to 10 µV.
  Accuracy: ±(0.05%+1).

Voltage AC.
  Max: 1000 V.
  Max Resolution: 1 µV.
  Accuracy: ±(0.4%+2).

Current DC.
  Max: 10 A.
  Max Resolution: 0.01 µA.
  Accuracy: ±(0.2%+2).

Current AC.
  Max: 10 A.
  Max resolution: 0.01 µA ±(0.6%+2).

Resistance.
  Max: 50 MΩ to 500 MΩ.
  Max Resolution: 0.01 Ω.
  Accuracy: ±(0.1%+2).

Conductance.
  Max: 500 nS.
  Max Resolution: 0.01 nS.

Capacitance.
  Max: 50000 µF.
  Max Resolution: 0.001 nF.
  Accuracy: ±(1.0%+3).

Frequency.
  Max: 1 MHz.
  Max Resolution: 0.001 Hz.
  Accuracy: ±(0.002%+1).

Temperature.
  Max: -50°C/+980°C ; -200°C/+1350°C.
  Max Resolution: 0.1°C.

dBm and dBV.
  Max: -52/+60 dB ; -74/+60 dB
  Max Resolution: 0.01 dB.



 

Standard Calibration $135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 185. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your FLUKE 185 CALIBRATION and/or FLUKE 185 Handheld True RMS Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: