ADVANTEST TR5822 CALIBRATION and ADVANTEST TR5822 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ADVANTEST TR5822 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Frequency Counter? Shop for Comparable Products on our   new Frequency Counter page

 
   ADVANTEST TR5822   Description / Specification:    
ADVANTEST TR5822 Universal Counter

The Advantest TR5822 is a universal counter capable of measuring frequencies from 1 mHz to 120 MHz. The TR5822 can measure periods from 20 ns to 1000 s and can make time interval measurements from 200 ns to 1000 s. Frequency ratio and totalization measurements can also be done from DC to 50MHz. For frequencies between 1 mHz and 50 MHz (INPUT B), the TR5822 uses the reciprocal method to find the frequency by measuring the period of the input frequency and then taking the reciprocal with the internal microprocessor to calculate the frequency. From 10 Hz to 120 MHz (INPUT A), the TR5822 uses the direct measurement method. Due to these various methods of measurement, accurate measurement of frequencies from low to high can be obtained from a single unit. The TR5822 also features a Masking Function, Autotrigger Function and can perform a self-check. When used with the TR1644, the TR5822 can do calculations on the measured results. The TR5822 comes with either built-in GPIB or BCD output or D/A converter. These features allow for system upgrading or automatic recording of measured results.



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ADVANTEST TR5822. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your ADVANTEST TR5822 CALIBRATION and/or ADVANTEST TR5822 Universal Counter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: