A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 4001A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our
 used Function Generator page or new Function Generator page

   BK PRECISION 4001A   Description / Specification:   Spec Sheet 
BK PRECISION 4001A 4 MHz Sweep Function Generator

The B&K Precision 4001A 4 MHz Sweep Function Generator offers linear or log sweep with variable sweep rates and widths. Specifications. Frequency Range: 0.5 Hz to 4 MHz in 6 Ranges. Waveforms: 6 Waveforms (Sine, Square, Triangle, Ramp, +Pulse, -Pulse). Amplitude: 0.2 Vpp - 20 Vpp (no load), 0.1 Vpp - 10 Vpp (50 ohm load). Attenuator: -20 db (±2%). Output Impedance: 50 ohm (±2%). DC Offset: ±10 V (pull ADJ.). Distortion: <2%, 1 Hz to 100 kHz. Rise/Fall Time: <90 ns. VCF Input: 0 to 10 V control. SYNC Output Rise Time: <60 ns (TTL), <90 ns (CMOS). SYNC Output Level: approx. 3 Vpp (TTL), variable 4 Vpp - 15 Vpp [±1 Vpp] (CMOS). SYNC Output Waveforms: Square, Pulse. Sweep Mode: Linear/Log Sweep. Sweep Rate: 5 s to 10 ms Continuously Variable. Sweep Output: 10 Vpp (open). Sweep Output Impedance: 1 k-ohm ±2%.


Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 4001A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your BK PRECISION 4001A CALIBRATION and/or BK PRECISION 4001A 4 MHz Sweep Function Generator REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: