BK PRECISION 4003A CALIBRATION and BK PRECISION 4003A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 4003A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   BK PRECISION 4003A   Description / Specification:   Spec Sheet 
BK PRECISION 4003A 4 MHz Sweep Function Generator/ 20 MHz Frequency Counter

The B&K Precision 4003A 4 MHz Sweep Function Generator with Frequency Counter offers linear or log sweep with variable sweep rates and widths. It has a 20 MHz 5-digit external frequency counter. Specifications. Frequency Range: 0.5 Hz to 4 MHz in 6 Ranges. Waveforms: 6 Waveforms (Sine, Square, Triangle, Ramp, +Pulse, -Pulse). Amplitude: 0.2 Vpp - 20 Vpp (no load), 0.1 Vpp - 10 Vpp (50 ohm load). Attenuator: -20 db (±2%). Output Impedance: 50 ohm (±2%). DC Offset: ±10 V (pull ADJ.). Distortion: <2%, 1 Hz to 100 kHz. Rise/Fall Time: <90 ns. VCF Input: 0 to 10 V control. SYNC Output Rise Time: <60 ns (TTL), <90 ns (CMOS). SYNC Output Level: approx. 3 Vpp (TTL), variable 4 Vpp - 15 Vpp [±1 Vpp] (CMOS). SYNC Output Waveforms: Square, Pulse. Sweep Mode: Linear/Log Sweep. Sweep Rate: 5 s to 10 ms Continuously Variable. Sweep Output: 10 Vpp (open). Sweep Output Impedance: 1 k-ohm ±2%. Frequency Counter Range: 0.2 Hz to 20 MHz. Display: 5-digit LED display with Autorange. Resolution: 0.01 Hz. MODE: INT Function Generator/EXT Counter. Accuracy: < 0.02% ± 1 digit, for >= 1 kHz. Sensitivity: <100 mVrms (1 MHz), <200 mVrms (>1 MHz). Max Input: <150 Vrms.



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 4003A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your BK PRECISION 4003A CALIBRATION and/or BK PRECISION 4003A 4 MHz Sweep Function Generator/ 20 MHz Frequency Counter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: