BK PRECISION 879 CALIBRATION and BK PRECISION 879 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 879 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   BK PRECISION 879   Description / Specification:    
BK PRECISION 879 Handheld LCR Meter

The BK Precision 879 is a 19,999-count L/C/R hand-held meter is a special microprocessor-controlled meter for measuring functions of inductance, capacitance and resistance. The 879 meter provides direct and accurate measurements of inductors, capacitors and resistors with different testing frequencies. It is selectable for auto and manual ranging. The test data can be transferred to PC through an optional full isolated optical RS232C interface. It has a backlight display for easy reading in dark places. Specifications. Parameters Measured: L/C/R/D/Q. Measuring Circuit Mode: Inductance (L) –Defaults to series mode, Capacitance/ Resistance (C/R) -Defaults to parallel mode. Displays: L/C/R - Maximum display 19999, D/Q - Maximum display 999 (Auto Range). Ranging Mode: Auto & Manual. Resistance (Parallel mode) Test Frequency 100 / 120 Hz, 1 / 10 KHz Range: 20 ohm to 10 M-ohm. Capacitance (Parallel mode) Test Frequency 100 / 120 Hz Range: 20 nF to 10 mF. Capacitance (Parallel mode) Test Frequency 1 KHz Range: 2000 pF to 1 mF. Capacitance (Parallel mode) Test Frequency 10 KHz Range: 200 pF to 50 µF. Inductance (Series mode) Test Frequency 100 / 120 Hz Range: 20 mH to 1000 H. Inductance (Series mode) Test Frequency 1 KHz Range: 20 mH to 1000H. Inductance (Series mode) Test Frequency 10 KHz Range: 2000 µH to 1000 mH.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 879. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your BK PRECISION 879 CALIBRATION and/or BK PRECISION 879 Handheld LCR Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: