Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ FSEK30. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSEK30 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

   ROHDE & SCHWARZ FSEK30 (1088.3494.35)   Description / Specification:    
ROHDE & SCHWARZ FSEK30 40 GHz Spectrum Analyzer

The Rohde & Schwarz FSEK30 (1088.3494.35) 40 GHz Spectrum Analyzer has been optimized both for general-purpose measurements and meeting the stringent requirements of testing advanced digital communication systems. The FSEK 30 combines the capabilities of high-end RF or microwave spectrum analysis with those of universal digital-signal demodulation and analysis. This becomes possible with the vector signal analyzer option. The spectrum analyzer function offers the wide dynamic range necessary for many measurements on digitally modulated signals (e.g. burst measurements), and the vector signal analyzer option adds demodulation capability to bit stream level for signals such as – BPSK, QPSK, pi/4-DQPSK and 16QAM, (G)MSK, (G)FSK. FSEK 30 features a minimum full-span sweep time of 5 ms with a fully synchronized sweep. This means that added speed is not at the expense of frequency accuracy but even enhances it. The shortest zero-span sweep time is 1 µs (100 ns/div) – ideal for high-resolution measurements on pulse edges. Up to 25 sweeps per second is an optimal prerequisite for rapid and easy alignments and for applications in production. Specifications. Frequency range: 20 Hz to 40 GHz. Frequency resolution: 0.01 Hz. Resolution bandwidths (3 dB bandwidths (in 1/2/3/5 steps)): 1 Hz to 10 MHz. Sweep time Span = 0 Hz: 1 µs to 2500 s in 5% steps. Displayed average noise floor in dBm (0 dB RF attenuation, RBW 10 Hz, VBW 1 Hz, 20 averages, trace average, span 0 Hz, termination 50 ohm): <–135, –138 typ (18 GHz to 26.5 GHz), <–120, –125 typ (26.5 GHz to 30 GHz), <–116, –122 typ.(30 GHz to 40 GHz). Max. dynamic range, bandwidth 1 Hz Displayed noise floor to 1 dB compression: 160 dB. Maximum input level CW RF power: 20 dBm (=0.1 W). Trigger: free run, line, video, RF, external. Display: 24 cm LC TFT colour display (9.5"). IEC/IEEE-bus control interface to IEC625-2 (IEEE 488.2), command set: SCPI 1994.0. Options. FSE-B7, Vector Signal Analyzer. FSE-B10, Tracking Generator 7 GHz. FSE-B11, Tracking Generator 7 GHz with I/Q modulator. FSE-B12, Switchable Attenuator for Tracking Generator. FSE-B13, 1 dB Attenuator. FSE-B15, Controller for FSE (mouse and keyboard included). FSE-B16, Ethernet Interface. FSE-B17, 2nd IEC/IEEE-Bus Interface for FSE. FSE-B18, Removable Hard Disk. FSE-B19, 2nd Hard Disk for FSE-B18 (firmware included). FSE-B22, Increased Level Accuracy up to 2 GHz. FSE-B23, Broadband Output 741.4 MHz. FS-K3, Noise Measurement Software, Windows. FS-K4, Phase Noise Measurement Software, Windows. FSE-K10, GSM Application Firmware Mobile station. FSE-K11, GSM Application Firmware Base station. FSE-K20, EDGE Application Firmware Mobile station. FSE-K21, EDGE Application Firmware Base station. FSE-B24, 44 GHz Frequency Extension.


Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSEK30. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping is the limiting of a signal so that it never exceeds some threshold.

Modulation is the coding of information onto the carrier frequency. This includes amplitude, frequency, or phase modulation techniques.

Sensitivity is the smallest signal that can reliably detected. Sensitivity specifies the strength of the smallest signal at the input that causes the output signal power to be M times the output noise power where M must be specified. M=1 is very popular

Please contact us for your ROHDE & SCHWARZ FSEK30 REPAIR and/or ROHDE & SCHWARZ FSEK30 40 GHz Spectrum Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: