Custom-Cal has a high success rate in the repair of the ANRITSU S251C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S251C Calibration, onsite calibration may be available.
We specialize in quick turnaround times and we can handle expedited deliveries upon request.
Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
used Network Analyzer, SNA, VNA page
or
new Network Analyzer, SNA, VNA page
More
|
|
|
The Anritsu S251C Site Master is a precision hand-held return loss/SWR and fault location measurement instrument. OSL calibration can be applied to all 1-port measurements (RL/VSWR/cable Loss/DTF) enabling accurate vector corrected measurements. Site Masters' SPA has dedicated routines for one-button measurements of field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), Carrier-to-Interference, and interference analysis. Light weight, rugged design, and wide temperature range make them ideal for field applications. The S251C Site Master’s proprietary design provides superior immunity to on-channel RF interference, which is important for live site testing. Features. Accurate return loss/SWR and fault location measurements. Accurately tests RF transmission lines and antennas. Superior immunity to on-channel interference for testing at co-located antenna sites. Specifications. Frequency range: 625 to 2500 MHz. Frequency Resolution: 10 kHz. Frequency Accuracy (CW Mode): ± 75 parts per million. Display data points Selectable: 130, 259, 517. Immunity to interfering RF signals: +10 dBm (RF out), +30 dBc transmission (On-frequency), +17 dBm (On-channel). Return Loss Range: 0.0 to 54.00 dB, Resolution: 0.01 dB. VSWR: Range 1 to 65, Resolution: 0.01 dB. Cable loss: Range 0 to 54, Resolution: 0.01 dB. Distance-To-Fault (DTF) Vertical Range: Return loss, 0 to 54 dB; SWR, 1 to 65. DTF Horizontal range (meter): 0 to (# of data points –1) x horizontal resolution, where data points = 130, 259 or 517. Maximum Input (Damage Level) +20 dBm. Options. Option 5: Power Monitor to measure power – external detector needed. Option 10B: Built-in bias tee.
|