YOKOGAWA AQ7270-735029 REPAIR and YOKOGAWA AQ7270-735029 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the YOKOGAWA AQ7270-735029. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA AQ7270-735029 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   YOKOGAWA AQ7270-735029   Description / Specification:    
YOKOGAWA AQ7270-735029 850 / 1300 nm Handheld OTDR

The Yokogawa AQ7270-735029 850/1300 nm, 22.5/24 dB Handheld OTDR automatically sets the optimal measurement conditions, performs measurement, performs event analysis, and saves data. Because you can save to a different file name each time you execute, measurement and accumulation of data is easy. In Multi Wavelength Measurement mode, multiple specified wavelengths from the same optical port are measured automatically in order. You can also specify to perform analysis or file saving as needed for each measurement. Specifications. Wavelength: 850/1300 ±30 nm. Applicable fiber: GI (50/125, 62.5/125 µm). Distance range: 500m, 1km, 2km, 5km, 10km, 20km, 50km, 100km. Pulse width: 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1us, 2us, 5us. Dynamic range: 22.5/24 dB. Event dead zone: 2 m (typ). Attenuation dead zone: 7/10 m (typ). Sampling resolution: 5 cm, 10 cm, 20 cm, 50 cm, 1 m, 2 m, 4 m, 8 m, 16 m, 32 m. Readout resolution: 1 cm (Min.). Number of sampled data: Up to 50,000 points. Group refractive index 1.30000 to 1.79999 (in 0.00001 steps). Unit of distance: km, kf, or miles. Distance measurement accuracy: Offset error: ±1 m Scale error: Measured distance x2 x10^-5 Sampling error: ±1 sampling resolution. Vertical axis scale: 0.2 dB/div, 0.5 dB/div, 1 dB/div, 2 dB/div, 5 dB/div, 7.5 dB/div. Readout resolution: 0.001 dB (Min.). Loss measurement accuracy: ±0.05 dB/dB. Distance measurement: Displays up to eight digits of the relative one-way distance between two arbitrary points on the trace. Loss measurement: Displays one-way loss in steps of 0.001 dB to a maximum of 5 digits; Displays the one-way loss, loss per unit length, and splice loss between any two given points on the waveform. Return loss measurement: Measures return loss and total return loss of a fiber cable or between two arbitrary points on the trace. Analysis functions: Multi trace analysis, 2 way trace analysis, differential trace analysis, section analysis. Options. /PM: Optical power monitor. /LS: Light source. /PL: Built-in printer, LAN. /DF: Dummy fiber (SMF). /SB: Shoulder belt.



 

Standard Calibration $380.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA AQ7270-735029. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.

Please contact us for your YOKOGAWA AQ7270-735029 REPAIR and/or YOKOGAWA AQ7270-735029 850 / 1300 nm Handheld OTDR CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: