EXFO FTB-8510B REPAIR and EXFO FTB-8510B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the EXFO FTB-8510B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO FTB-8510B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another LAN-WAN Network Tester? Shop for Comparable Products on our   new LAN-WAN Network Tester page

 
   EXFO FTB-8510B   Description / Specification:    
EXFO FTB-8510B Packet Blazer Ethernet Test Module

The EXFO’s FTB-8510B Packet Blazer brings performance assurance to Ethernet-based services. Its wide range of test functionalities provides all the necessary measurement tools for verifying service-level agreements (SLAs) between service providers and their customers.The Exfo FTB-8510B module tests connectivity in its native format: 10/100/1000Base-T, 100Base-FX, 100Base-LX, 1000Base-SX, 1000Base-LX and 1000Base-ZX for today’s Ethernet services. The Exfo FTB-8510B module is the ideal tool for turning-up and troubleshooting Ethernet-based mobile backhaul, commercial and wholesale services.Combined with its rack-mounted remote test unit counterpart, the RTU-310, the Exfo FTB-8510B simplifies and speeds up the deployment of Ethernet services. Complete EtherSAM (ITU-T Y.1564) test suite allowing full validation of today’s Ethernet services (bidirectional results through dual test set). Multistream generation and analysis, providing per-stream measurements for throughput, latency, frame loss and pocket jitter. True wire-speed and stateful TCP throughput testing. PBB-TE and MPLS support for Carrier Ethernet. Up to 1 Gbit/s full-line-rate data capture and decode. IPTV testing and analysis. Dual port capability for simultaneous traffic generation and reception at 100 % wire speed for 10/100/1000Base-T, 100Base-FX, 100Base-LX, 1000Base-SX, 1000Base-LX or 1000Base-ZX full-duplex networks at all packet sizes. Ethernet in the First Mile 802.3ah testing. Fibre Channel 1x and 2x test suite. Remote control capability through Visual Guardian Lite and VNC software. Configurable advanced filters for in-depth network troubleshooting. Service disruption time measurement and IPv6 testing. Testing BERT Unframed, framed FC-1, framed FC-2. Patterns (BERT) PRBS 2E31-1, 2E23-1, 2E20-1, 2E15-1, 2E11-1, 2E9-1 CSPAT, CRPAT, CJTPAT, and 10 user-defined 32 bits patterns. Error insertion Bit error, symbol error, oversize error, CRC error, undersize error. Error measurement Bit error, symbol error, oversize error, CRC error, undersize error, performance management (G.821 and G.826). Alarm insertion LOS, pattern loss, link down. Alarm detection LOS, pattern loss, link down. Buffer-to-buffer credit testing Buffer-to-buffer credit estimation based on latency. Latency Round-trip latency measurement. Power measurement Support optical power measurement, displayed in dBm. Frequency measurement Supports clock frequency measurements (i.e., received frequency and deviation of the input signal clock from nominal frequency). Frequency offset measurement Range ±120 ppm, Resolution 1 ppm, Accuracy (uncertainty) ±4.6 ppm. Frequency offset generation Range ±120 ppm, Resolution 1 ppm, Accuracy (uncertainty) ±4.6 ppm. Size (H x W x D) 96 mm x 25 mm x 280 mm (3 3/4 in x 1 in x 11 in). Weight (without transceivers) 0.5 kg (1.1 lb).



 

Standard Calibration $415.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO FTB-8510B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your EXFO FTB-8510B REPAIR and/or EXFO FTB-8510B Packet Blazer Ethernet Test Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: