YOKOGAWA FG210-706111 CALIBRATION and YOKOGAWA FG210-706111 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA FG210-706111 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   YOKOGAWA FG210-706111   Description / Specification:    
YOKOGAWA FG210-706111 1-Ch 15 MHz Synthesized Function Generator

The Yokogawa 706111 FG210 1-channel Synthesized Function Generator features versatile sweep and modulation functions. These instruments offer you the capability to sweep not only frequency, but also other parameters as well, such as phase, amplitude, offset voltage, or duty cycle, with linear, log, linear step and log step. You can even sweep frequency and amplitude at the same time. Specifications. Output channels: 1 channel. Output waveforms: Sine, Square (fixed 50% duty cycle), Triangle (variable symmetry) or Pulse (variable duty cycle). Output signal: Continuous output(CONT): Waveform output continuously, Phase-continuous only. Triggered output (TRIG): Output preset number (integer) of burst waveforms on trigger sync. Gated output (GATE): Output integer number of burst waveforms while enabled by gate. DC output (DC): Output DC voltage. Frequency range: Sine or Square waveform 1 uHz to 15 MHz, Triangle or Pulse waveform 1 uHz to 200 kHz. Resolution: 1 uHz or 9 digits max. Frequency accuracy: ±20 ppm. Frequency stability: ±20 ppm (at ambient temperature of 5 to 40°C). Reference clock: 40.2107 MHz. Maximum output voltage: ±10 V. Amplitude setting range: ±20 Vpp (setting resolution 1 mVpp) (negative amplitude represents inverted waveform). Amplitude accuracy V(1 kHz sine wave): ±(0.8% of setting + 14 mVrms). Offset voltage setting range: ±10 V (setting resolution 1 mV). Offset voltage accuracy: ±(0.3% of setting + 0.5% of amplitude setting +40 mV). Output impedance: 50 ohm ±1% (open when output OFF). DC output setting range: ±10 V (setting resolution 1mV). DC output accuracy: ±(0.3% of setting + 20 mV). Output attenuator setting range: 1/1, 1/10, 1/100. Output attenuator accuracy: 0.2%. Option. /R1, External sweep control.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA FG210-706111. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your YOKOGAWA FG210-706111 CALIBRATION and/or YOKOGAWA FG210-706111 1-Ch 15 MHz Synthesized Function Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: