ROHDE & SCHWARZ FSQ3 CALIBRATION and ROHDE & SCHWARZ FSQ3 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSQ3 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Analyzer?
Shop for Comparable Products on our  used Signal Analyzer page

 
   ROHDE & SCHWARZ FSQ3 (1155.5001.03)   Description / Specification:    
ROHDE & SCHWARZ FSQ3 3.6 GHz Signal Analyzer

The R&S FSQ3 20 Hz to 3.6 GHz Signal Analyzer offers very low phase noise, unsurpassed low residual EVM, a wide dynamic range and above-average accuracy, making it the ideal high-end measuring instrument for development applications, where tolerances and limit values must often be lower than defined in a standard. Specifications. Frequency range: 20 Hz to 3.6 GHz. RF Performance: DANL with preamplifier < -152 dBm (10Hz); SSB phase noise typ. - 133 dBc (1Hz) at 10 kHz offset, CF 640 MHz; Phase-noise typ. - 160 dBc/Hz @ 10 MHz offset, CF 640 MHz; TOI typ. ±25 dBm; 1-dB-compression point + 13 dBm; 3GPP ACLR 77 dB, 84 dB with noise correction; ACLR for 4-carrier scenario: 77 dB with noise correction. Accuracy: 0.3 dB total level uncertainty up to 3.6 GHz; <0.1 dB linearity error down to -70 dB . IQ Downconverter: IF digitizer 14 bit 81.6 MHz (20.4 MHz IF); IF digitizer 326.4 MHz (option FSQ-B72); IQ Bandwidth (RF) 28 MHz (up to 120 MHz mwith option FSQ-B72); SFDR > 80 dB; IQ memory 16 Msamples each I and Q; output via GPIB or LAN; Sample rate: cont. settable from 10 kHz to 81.6 MHz; e.g. 20 MHz for IEEE802.11a. Speed: 2.5ms sweep time in frequency domain; 1 µs sweep time in time domain; up to 70 remote measurements/s via GPIB; up to 80 manual measurements/s (screen update).



 

Standard Calibration $735.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSQ3. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your ROHDE & SCHWARZ FSQ3 CALIBRATION and/or ROHDE & SCHWARZ FSQ3 3.6 GHz Signal Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: