NEWPORT 2550P-FP REPAIR and NEWPORT 2550P-FP CALIBRATION
 
Custom-Cal has a high success rate in the repair of the NEWPORT 2550P-FP. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NEWPORT 2550P-FP Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Polarization Meter?
Shop for Comparable Products on our  used Polarization Meter page or new Polarization Meter page

 
   NEWPORT 2550P-FP   Description / Specification:    
NEWPORT 2550P-FP Degree of Polarization Meter

The Newport’s 2550P-FP Degree-Of-Polarization (DOP) measurement system integrates a polarization controller, an optical polarization detection circuit, and a microprocessor based electronic control circuit The 2550P series uses a proprietary measurement scheme that is independent of optical wavelength, bandwidth of the optical source, and degree of polarization of the optical source. It is an ideal tool for CW or quasi-CW laser characterization, optical network monitoring applications, and light source and optical component characterization. The DOP meter can measure not only the DOP value, but also the optical signal-to-noise-ratio (OSNR) and noise figure (NF) simultaneously. Specifications. Operating wavelength: 1260 to1650 nm. DOP Readout Resolution: 0.1 %. DOP accuracy: ± 0.5 %. Repeatability: ± 0.5 %. Measurement speed: < 0.2 seconds. DOP range: 0 to100%. Power estimate accuracy: +/-0.25 dB. Optical power range: -25 dBm to +6 dBm.



 

Standard Calibration $1,280.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NEWPORT 2550P-FP. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your NEWPORT 2550P-FP REPAIR and/or NEWPORT 2550P-FP Degree of Polarization Meter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: