MIYACHI UNITEK HF25 CALIBRATION
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MIYACHI UNITEK HF25 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   MIYACHI UNITEK HF25   Description / Specification:    
MIYACHI UNITEK HF25

Miyachi Unitek HF25 DC Resistance Welding System is a 25 kHz, three-phase, state-of-the-art inverter power supply for joining precision small parts at high speed with controllable rise times. The delivered welding energy is in the form of DC welding energy. High speed (40 microseconds) digital feedback automatically controls weld current, voltage, or power, providing more welding consistency compared to traditional direct energy (AC) or capacitive discharge (CD) technologies. This microprocessor technology automatically compensates for changes in work piece resistance, load inductance, weld transformer saturation, and changes in line voltage. Input kVA (Demand) 30 kVA max at 3% duty cycle. Output Power at 12% Duty Cycle and a Combined PULSE 1 and PULSE 2 Pulse Width of 50 mS: 6.0 kW max. Maximum Output Current: 2400A. Max Peak Output Voltage at Max Peak Output Current: 5.2V. Duty Cycle at Max Peak Output Current: 3%. Max Load Resistance for Max Output Current: 2.1 m-Ohm. Current: 100 - 2400 A, 0.001 kA, ±(2% of setting +2 A); Voltage: 0.2 - 9.99 V, 0.001 V ±(2% of setting +0.02 V); Power: 0.05 - 9.99 kW, 0.001 kW, ±(5% of setting +10 W); Weld Periods 0.0 - 9.9 mS with 0.1 mS at +/-20 uS; 10 - 99 mS with 0.1 mS resolution at ± 20 uS.



 

Standard Calibration $2,195.00 *
*This is a Web introductory price for one calibration of the MIYACHI UNITEK HF25. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Mechanical Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Ball Micrometer
Ball micrometers have ball-shaped (spherical) anvils. They may have one flat and one ball anvil, in which case they are used for measuring tube wall thickness, distance of a hole to an edge, and other distances where one anvil must be placed against a rounded surface.

in-oz
Inch-ounce is a measurment of torque expressed as a force (ounce) multiplied by (i.e. “times”) a distance (inch). It is the amount of force applied in the direction of turning by one ounce on a one inch lever. To convert Inch-ounce to Inch-pound multiply by 0.0625. To convert Inch-ounce to Foot-pound (ft-lb) multiply by 0.0052.

Strain
A strain is a normalized measure of deformation representing the displacement between particles in the body relative to a reference length.

Please contact us for your MIYACHI UNITEK HF25 CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: