ROHDE & SCHWARZ NRV-Z3 CALIBRATION and ROHDE & SCHWARZ NRV-Z3 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ NRV-Z3 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   ROHDE & SCHWARZ NRV-Z3 (828.3418.02)   Description / Specification:    
ROHDE & SCHWARZ NRV-Z3 2.5 GHz High-Sensitivity Diode Sensor

The Rohde & Schwarz NRV-Z3 is a high-sensitivity power sensor based on zero-bias Schottky diodes, this opens up the power range below 1 µW down to the physical limit of 100 pW (-70 dBm). In the range, from -70 dBm to -20 dBm, it's behaviour is much the same as that of thermal sensors, i.e. precise measurement of the average power of modulated signals, RMS weighting of harmonics and linearity independent of temperature and frequency. Specifications. Frequency range: 1 MHz to 2.5 GHz. Power measurement range, max. power: 100 pW to 13 mW, 70 mW (AVG), 70 mW (PK). Max. SWR (reflection coefficient): 1 MHz to 1 GHz 1.11 (0.05), >1 GHz to 2.5 GHz 1.20 (0.09). Zero offset: ±40 pW. Display noise: 16 pW. Linearity uncertainty: 0.03 dB (0.7%). Power coefficient: 0. Connector: Type N, 75 ohm.



 

Standard Calibration $330.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ NRV-Z3. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your ROHDE & SCHWARZ NRV-Z3 CALIBRATION and/or ROHDE & SCHWARZ NRV-Z3 2.5 GHz High-Sensitivity Diode Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: