ROHDE & SCHWARZ ZVL13 CALIBRATION and ROHDE & SCHWARZ ZVL13 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ ZVL13 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ROHDE & SCHWARZ ZVL13 (1303.6509.13)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ ZVL13 13.6 GHz Portable Vector Network Analyzer, 50 Ohm

The R&S ZVL13 (1303.6509.13) 13.6 GHz 50 ohm Vector Network Analyzer is a portable network analyzer in the compact class, and is therefore ideal for use in development, production, and service. It combines the functions of a network analyzer, spectrum analyzer, and power meter in a single box. Specifications. Frequency range: 9 kHz to 13.6 GHz (overrange 5 kHz to 15 GHz). Frequency resolution: 1 Hz. Measurement bandwidths: 10 Hz to 500 kHz in 1/2/5 steps. Measurement time (201 measurement points, full two-port-calibrated): < 75 ms. Data transfer (201 measurement points): 1.5 ms (via RSIB over 100 Mbit/s LAN). Dynamic range: > 100 dB, typ. 105 dB (20 MHz to 10 GHz), > 95 dB, typ. 100 dB (10 GHz to 13.6 GHz). Test port output Power range: –35 dBm to –5 dBm typ. –40 dBm to 0 dBm. Test port output Power resolution: 0.01 dB. Test port input Attenuation: 0 dB to 30 dB. Test port input Damage CW RF power: +27 dBm. Display: color TFT, 640 × 480 pixels. Options. FSL-B4 (1300.6008.02), OCXO Reference Frequency. FSL-B5 (1300.6108.02), Additional Interfaces. FSL-B6 (1300.5901.02), TV Trigger. FSL-B7 (1300.5601.02), Narrow Resolution Filters. FSL-B8 (1300.5701.02), Gated Sweep. B10 1300.6208.02), GPIB Interface. FSL-B22 (1300.5953.02), RF Preamplifier (3/6 GHz). FSL-B30 (1300.6308.02), DC Power Supply. FSL-B31 (1300.6408.02), NiMH Battery Pack. FSL-K9 (1301.9530.02), Power Sensor Support. ZVL-K1 (1306.0301.02), Spectrum Analysis. ZVL-K3 (1306.0201.02), Time Domain. FSL-K14 (1302.0913.02), Spectrogram Measurements. FSL-K20 (1301.9675.02), Cable TV and TV Measurements.



 

Standard Calibration $1,095.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ ZVL13. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ROHDE & SCHWARZ ZVL13 CALIBRATION and/or ROHDE & SCHWARZ ZVL13 13.6 GHz Portable Vector Network Analyzer, 50 Ohm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: