ANRITSU S331E REPAIR and ANRITSU S331E CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANRITSU S331E. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S331E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   ANRITSU S331E   Description / Specification:   Spec Sheet 
ANRITSU S331E 4 GHz Site Master Cable and Antenna Analyzer

The Anritsu S331E Site Master Cable and Antenna Analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that identifies and fixes problems before major failures occur. Cable and Antenna Analyzer Highlights; Measurements: RL, VSWR, Cable Loss, DTF, Phase. 2-port Transmission Measurement: High/Low Power. Sweep Speed: 1 ms/data point, typical. Display: Single or Dual Measurement Touchscreen. 4.5 hour battery operation time. Store 2000 Traces internally.
Specifications

Frequency Range: 2 MHz to 4 GHz.
Frequency Accuracy: <= ± 2.5 ppm @ 25 C.
Frequency Resolution: 1 kHz (RF immunity low), 100 kHz (RF immunity high).
Output Power High: 0 dBm, typical.
Output Power Low: -30 dBm, typical.
Interference Immunity: On-Channel +17 dBm @ > 1.0 MHz from carrier frequency.
Measurement Speed Return Loss: <= 1.00 ms/data point, RF immunity low, typical.
Measurement Speed Distance-to-Fault: <= 1.25 ms/data point, RF immunity low, typical.
Return Loss Measurement Range: 0 dB to 60 dB.
VSWR Measurement Range: 1:1 to 65:1.
Cable Loss Measurement Range: 0 dB to 30 dB.
Distance-to-Fault Vertical Range Return Loss: 0 dB to 60 dB.
Measurement Accuracy Corrected Directivity: > 42 dB, OSL Calibration.

Options
-0021, 2-Port Transmission Measurement. 
-0010, Bias-Tee (requires Option 0021).
-0031, GPS Receiver (requires Antenna).
-0019, High-Accuracy Power Meter (requires External Power Sensor).
-0411, Ethernet Connectivity.



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S331E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your ANRITSU S331E REPAIR and/or ANRITSU S331E 4 GHz Site Master Cable and Antenna Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: