ROHDE & SCHWARZ FSP38 REPAIR and ROHDE & SCHWARZ FSP38 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ FSP38. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSP38 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSP38 (1164.4391.38)   Description / Specification:    
ROHDE & SCHWARZ FSP38 40 GHz Portable Spectrum Analyzer

The Rohde & Schwarz FSP-38 40 GHz spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz FSP-38. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Specifications. Frequency range: 9 kHz to 40 GHz. Frequency resolution: 0.01 Hz. External reference frequency: 10 MHz. Frequency display: with marker or frequency counter. Resolution bandwidths: 10 Hz to 10 MHz (-3 dB) in 1-, 3- steps. EMI-Bandwidths: 200 Hz, 9 kHz, 120 kHz (-6 dB). Sweep time Span = 10 Hz: 2.5 ms to 16000 s. Display range: displayed average noise level to 30 dBm. Displayed average noise level: (0-dB RF attenuation, RBW 100 Hz, VBW 1 Hz, 20 averages, trace average, span 0 Hz, termination 50 Ohm. RF input: Testportsystem, N female and K female, 50 Ohm. Channel filters from 100 Hz to 5 MHz and RRC filters FFT filters from 1Hz to 30 kHz EMI bandwidths and quasi-peak detector Total measurement uncertainty 0.5 dB Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard CCDF (Complementary Cumulative Distribution Function) analysis. Incorporates a high speed statistical analysis of spread spectrum and frequency agile applications Fast ACP in time domain Up to 80 measurements per second (including trace transfer via GPIB) Electronic attenuator Direct Phase Noise Measurement Windows PC Compatible Features: PC-compatible screenshots, no conversion software needed Windows printer support USB interface for connecting PC peripherals LabWindows driver LabView driver SCPI-compatible R&S FSE/FSIQ-compatible GPIB command set Agilent 856x series Spectrum Analyzer Emulation Compatible with IEEE-488 programs written for Agilent 856x series.



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSP38. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your ROHDE & SCHWARZ FSP38 REPAIR and/or ROHDE & SCHWARZ FSP38 40 GHz Portable Spectrum Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: