MEGGER MIT520/2 CALIBRATION and MEGGER MIT520/2 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MEGGER MIT520/2 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   MEGGER MIT520/2   Description / Specification:    
MEGGER MIT520/2 5 kV Insulation Resistance Tester

The Megger MIT 520/2 insulation resistance tester is designed specifically to assist with the testing and maintenance of high voltage electrical equipment. It has a large easy to read backlit LCD display making it equally suitable for use in both bright sunlight and poorly lit environments. Information displayed includes resistance, voltage, leakage current, capacitance, battery status and time constant. In addition, the elapsed time of the test is displayed constantly, removing the need for separate timers. Adjustable timers and limit alarms are included.
Specifications.

Voltage input range: 85-265 V rms, 50/60 Hz, 60 VA.
Test voltages: 50 V to 1 kV in 10 V steps, 1 kV to 5 kV in 25 V steps.
Accuracy from 1 MΩ @ 5000V: ±5% to 1 TΩ, ±20% to 10 TΩ.
Guard: 2% error guarding 500 kΩ leakage with 100 MΩ load.
Short circuit/charge current: 3 mA @ 5 kV.
Capacitor charge time: <3 seconds per μF at 3mA to 5 kV.
Capacitor discharge time: <120ms per μF to discharge from 5000 V to 50 V.
Capacitance measurement (above 500 V): 10 nF to 50 μF (dependent on measurement voltage).
Capacitance measurement accuracy (23 °C): ±5% ±5 nF.
Voltage output accuracy (0 °C to 30 °C): +4%, -0%, ±10 V of nominal test voltage at 1 GΩ load.
Current measurement range: 0.01 nA to 5 mA.
Current measurement accuracy (23 °C): ±5% ±0.2 nA at all voltages.
Default voltmeter range: 50-600 V ac or dc Accuracy (23 ºC) + or -2% + or -1 V.
Interference rejection: 1 mA per 250 V up to a maximum of 2 mA.



 

Standard Calibration $460.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the MEGGER MIT520/2. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your MEGGER MIT520/2 CALIBRATION and/or MEGGER MIT520/2 5 kV Insulation Resistance Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: