ANRITSU S332E REPAIR and ANRITSU S332E CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANRITSU S332E. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S332E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU S332E   Description / Specification:   Spec Sheet 
ANRITSU S332E 4 GHz Site Master Cable and Antenna / Spectrum Analyzer

The Anritsu S332E Site Master integrated cable and antenna analyzer and spectrum analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that allows you to identify and address minor problems before they become major ones. 4.5 hour battery operation time. Store 2000 Traces internally. Cable and Antenna Analyzer Measurements: RL, VSWR, Cable Loss, DTF, Phase. Spectrum and Interference Analyzer Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I. Cable and Antenna Analyzer Specifications. Frequency Range: 2 MHz to 4 GHz. Frequency Accuracy: <= ± 2.5 ppm @ 25 C. Frequency Resolution: 1 kHz (RF immunity low), 100 kHz (RF immunity high). Output Power High: 0 dBm, typical. Output Power Low: –30 dBm, typical. Interference Immunity: On-Channel +17 dBm @ > 1.0 MHz from carrier frequency. Measurement Speed Return Loss: <= 1.00 ms/data point, RF immunity low, typical. Measurement Speed Distance-to-Fault: <= 1.25 ms/data point, RF immunity low, typical. Return Loss Measurement Range: 0 dB to 60 dB. VSWR Measurement Range: 1:1 to 65:1. Cable Loss Measurement Range: 0 dB to 30 dB. Distance-to-Fault Vertical Range Return Loss: 0 dB to 60 dB. Measurement Accuracy Corrected Directivity: > 42 dB, OSL Calibration. Spectrum Analyzer Specifications. Frequency Range: 9 kHz to 4 GHz. Tuning Resolution: 1 Hz. Frequency Span: 10 Hz to 4 GHz including zero span. Sweep Time: Minimum 100 ms, 10 µs to 600 s in zero span. Resolution Bandwidth (RBW): 10 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth). Video Bandwidth (VBW): 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable). Amplitude Dynamic Range: > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW. Amplitude Measurement Range: DANL to +26 dBm. Options. -0021, 2-Port Transmission Measurement. -0010, Bias-Tee. -0031, GPS Receiver (requires Antenna). -0019, High-Accuracy Power Meter (requires External Power Sensor). -0029, Power Meter. -0025, Interference Analyzer (recommend Option 0031). -0027, Channel Scanner. -0431, Coverage Mapping (requires Option 0031). -0090, Gated Sweep. -0028, C/W Signal Generator (requires CW Signal Generator Kit, P/N 69793). -0509, AM/FM/PM Analyzer. -0411, Ethernet Connectivity.



 

Standard Calibration $785.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S332E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

White Noise
White noise is noise whose power spectral density (watts/hertz) is constant for the frequency range of interest.

Please contact us for your ANRITSU S332E REPAIR and/or ANRITSU S332E 4 GHz Site Master Cable and Antenna / Spectrum Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: