GIGATRONICS 2502B CALIBRATION and GIGATRONICS 2502B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the GIGATRONICS 2502B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   GIGATRONICS 2502B   Description / Specification:    
GIGATRONICS 2502B Microwave Signal Generator

The Giga-Tronics 2502B Microwave Signal Generator delivers industry-best offset phase noise performance, high output power, and fast frequency switching speeds in a single unit. Performance features such as high time base stability, frequency modulation (FM), high-speed pulse/square wave modulation (PM), amplitude modulation (AM) and high leveled output power makes it an excellent test solution for a wide range of CW, modulation, swept frequency, and fast frequency switching applications in both R&D and manufacturing environment. The 2500B series Microwave Signal Generator utilizes new Advanced Synthesizer Technology that delivers excellent close in phase noise performance of -77dBc @ 100 Hz and -96dBc @ 1KHz and an ultra low phase noise performance of -109 dBc @ 10 kHz and 100 kHz offset on a 10 GHz carrier frequency. Features. Frequency range: 100 MHz to 2 GHz. Output power: +13 dBm at 50 GHz. Standard Low Phase Noise: -109 dBc/Hz at 10 GHz and 10 kHz offset. Ultra-low close-in Phase Noise option: -90 dBc/Hz at 10 GHz and 100 Hz offset, -70 dBc/Hz at 10 GHz and 10 Hz offset. High Stability Time Base for outstanding frequency accuracy; 0.001 Hz frequency resolution. Excellent Spectral Purity. Harmonics: < -55 dBc. Sub-harmonics: < -60 dBc. Spurious: < -58 dBc. Phase Modulation Rate: 100 Hz to 100 kHz, Peak Dev 10 rad-pk/N. Pulse Burst mode: 1 to 300 pulses/burst, Set pulse width, rep rate and burst period. Power Boost mode option. USB and Ethernet LAN interface. Emulation Modes, now standard on all 2500B series Microwave Signal Generators (not all of the commands are available). Options. 17A - Add Internal and External Modulation Suite (includes internal function generator). 17B - Add External Modulation Suite. 20 - Add High RF Output Power. 22 - Move RF Output Connector to Rear Panel. 27 - Add 110 dB Electronic Step Attenuator. 28 - Add Ultra-Low Close-in Phase Noise. 29 - Add Fast Frequency Switching Speed. 32 - Add Narrow Pulse Width = 100 ns (Requires Option 17A or 17B). 44 - Replace Standard Front Panel with Blank Front Panel (Requires Option 22). 46 - Add Rack Slide Kit.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your GIGATRONICS 2502B CALIBRATION and/or GIGATRONICS 2502B Microwave Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: