YOKOGAWA WT3000-760301 CALIBRATION and YOKOGAWA WT3000-760301 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA WT3000-760301 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   YOKOGAWA WT3000-760301   Description / Specification:    
YOKOGAWA WT3000-760301 Single-input Element Precision Power Analyzer

The Yokogawa 760301 WT3000 Precision Power Analyzer is the ideal measurement solution for applications such as product efficiency testing, engineering, R&D work on inverters, motor drives, lighting systems and electronic ballasts, UPS systems, aircraft power systems, transformer testing and other power conversion devices. Basic power accuracy of ± 0.02% of reading, DC and 0.1 Hz to 1 MHz measurement bandwidths, with one input element, the WT3000 provides higher-accuracy measurement for inverter I/O efficiency. Features. Large, 8.4-inch LCD and the Range Indicator LEDs. 50 ms Data Storing Interval. Available GP-IB, Ethernet, RS-232 and USB. Specifications. Basic Power Accuracy: ±(0.02% of reading + 0.04% of range). Frequency Range: DC, 0.1 Hz to 1 MHz. Power factor influence when cos phi=0: 0.03% of S (S is reading value of apparent power)(phi is phase angle between voltage and current). Current Range Direct Input: 0.5/1/2/5/10/20/30 A, 5m/10m/20m/50m/100m/200m/500m/1/2 A (when crest factor is 3). Current Range External sensor Input: 50m/100m/200m/500m/1/2/5/10 V (when crest factor is 3). Guaranteed accuracy range for voltage and current ranges: 1% to 130%. Main measurement parameters: Voltage, current, active power, reactive power, apparent power, power factor, phase angle, peak voltage, peak current, crest factor. Motor Version provides analog or pulse signal from rotating sensor and torque meter can be input, and allows calculation of torque, revolution speed, mechanical power, synchronous speed, slip, motor efficiency, and total efficiency in a single unit. Options. -01, 30A input element. -10, 2A input element. -SV, Standard Version. -MV, Motor Version. /G6, Advanced Computation (IEC standard testing(requires 761922 software), harmonic, FFT, Waveform computation). /B5, Built-in Printer. /DT, Delta Calculation. /FQ, Add-on Frequency Measurement. /DA, 20ch D/A output. /V1, VGA Output. /C2, Serial (RS-232) Interface. /C12, USB port (PC). /C5, USB port (Peripheral). /C7, Ethernet function. /CC, Cycle by Cycle. /FL, Voltage Fluctuation, Flicker.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA WT3000-760301. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your YOKOGAWA WT3000-760301 CALIBRATION and/or YOKOGAWA WT3000-760301 Single-input Element Precision Power Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: