YOKOGAWA AQ2200-141 CALIBRATION and YOKOGAWA AQ2200-141 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA AQ2200-141 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   YOKOGAWA AQ2200-141 (810518902)   Description / Specification:    
YOKOGAWA AQ2200-141 FP-LD Light Source Module 1310 or 1550 nm

The Yokogawa AQ2200-141 is a 1310 or 1550 nm FP-LD light source for the AQ2200 series. When it is mounted in AQ2200 series frame controllers, it provides high-output, high-stability optical output. The AQ2200-141 has an optical output ON/OFF function, 0-6 dB level adjustment function, and internal modulation function (270 Hz, 1 kHz, 2 kHz). These functions are easy to control through the setting screen. Specifications. Center wavelength: 1310 ±20 nm (when 1310 nm is selected), 1550 ±20 nm (when 1550 nm is selected). Spectral width: 5 nm or less (when 1310 nm is selected), 10 nm or less (when 1550 nm is selected). Optical output level: +0 dBm or higher. Output level Temperature stabillity: 0.2 dB p-p or less (5 to 40°C, 8 hours). Output level Time stabillity: ±0.003 dB p-p or less (15 minutes), ±0.03 dB p-p or less (24 hours). Optical attenuation width: 0 to 6 dB (steps of 0.01 dB). Internal modulation frequency: 270 Hz, 1 kHz, 2kHz. Applicable fiber: SM (ITU-T G.652). Optical connector: AQ9441(FC or SC) universal adapter. Wavelength Suffix code: -W1310, 1310 nm, -W1550, 1550 nm.



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA AQ2200-141. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your YOKOGAWA AQ2200-141 CALIBRATION and/or YOKOGAWA AQ2200-141 FP-LD Light Source Module 1310 or 1550 nm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: