YOKOGAWA 701856 CALIBRATION and YOKOGAWA 701856 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA 701856 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Plug In?
Shop for Comparable Products on our  used Oscilloscope Plug In page

 
   YOKOGAWA 701856   Description / Specification:    
YOKOGAWA 701856 High-Speed 10 Ms/s 12-Bit Module

The Yokogawa 701856 High-Speed 10 Ms/s 12-Bit Module (1 ch) is used with the DL708, DL708E and DL716 mainframes. Specifications. Input channels: 1. Input couplings: DC, AC, GND. Maximum sample rate: 10 MS/s. A/D conversion resolution 12 bit (500 LSB/div). Input format: Non-isolated unbalanced. Frequency characteristics (-3 dB point when sine wave of amplitude ± 3 div is input): DC to 4 MHz. Voltage-axis sensitivity setting: 5 mV/div to 20 V/div (1-2-5 steps). Maximum input voltage (At 1 kHz or less): (across input terminals H and L) 250 V(DC+ACpeak)(CAT I and II, 177 Vrms). DC offset range (max) (At 1:1 probe attenuation): 5 mV/div to 50 mV/div : ± 0.5 V, 100 mV/div to 500 mV/div : ± 5 V, 1 V/div to 5 V/div : ± 50 V, 10 V/div to 20 V/div : ± 250 V. Input connector: BNC connector. Input impedance: 1 M-ohm 1%, approx. 30pF. -3dB point for AC coupling used: 10 Hz or less(1 Hz or less when using 10:1 probe). Probe attenuation settings: 1:1, 10:1, 100:1 and 1000:1. Bandwidth limit: Select from OFF/500 Hz/5 kHz/ 50 kHz/ 500 kHz.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA 701856. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your YOKOGAWA 701856 CALIBRATION and/or YOKOGAWA 701856 High-Speed 10 Ms/s 12-Bit Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: