OWL, INC. WTO-S15 CALIBRATION and OWL, INC. WTO-S15 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the OWL, INC. WTO-S15 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   OWL, INC. WTO-S15   Description / Specification:    
OWL, INC. WTO-S15 OWLTrek OTDR

The Optical Wavelength Laboratories WTO-S15 OWLTrek OTDR is pocket-sized, but the large 2.8" high-resolution color LCD display can show even the longest traces with ease. And, for greater viewing flexibility and trace detail, OWL has implemented state-of-the-art MEMS technology which "flips" the high-resolution color LCD display between portrait and landscape mode automatically. In landscape mode, a wider viewing area means greater viewing detail. Automatic event location is an advanced feature normally found only in expensive, high-end OTDRs. The OWLTrek OTDR now brings this feature to the entry-level OTDR market. While in event location mode, the OWLTrek OTDR marks events on the trace, has an event table showing the location, type, reflectance level, and loss of each event, and auto-zooms to the selected event. Specifications. Output Wavelength: 1550 nm. Fiber Type: Singlemode. Dynamic Range (SNR=1)( Using maximum pulse width): 23 dB. Distance Range: 80 miles (128 kilometers). Event Dead Zone: 2 meters (typical). Attenuation Dead Zone: 7 meters (typical). Maximum Data Points: 64000. Data Point Spacing: Up to 64km: 1 meter // Over 64km: 2 meters. Pulse Width: 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 meters. Index of Refraction: 1.4000 to 1.6000. Distance Accuracy: Up to 64km: 1 + (distance in meters/10000) // Over 64km: 2 + (distance in meters/10000). Number of Stored Traces: Maximum trace distance: up to 200 // Minimum trace distance: 3000+.



 

Standard Calibration $405.00 *
*This is a Web introductory price for one calibration of the OWL, INC. WTO-S15. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your OWL, INC. WTO-S15 CALIBRATION and/or OWL, INC. WTO-S15 OWLTrek OTDR REPAIR

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: