A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NOYES CS260-20 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

   NOYES CS260-20   Description / Specification:    
NOYES CS260-20 Metro/Access OTDR

The NOYES CS260-20 Contractor Series Metro/Access OTDR is a dual-wavelength, 1310/1550 nm OTDR for troubleshooting point-to-point metro/access optical networks up to 60 km (40 miles) in length. The CS260-20 provides extremely short event and attenuation dead zones (0.8 and 3.5 m, respectively), enabling closely spaced events to be individually resolved and measured in short access networks. To further aid in locating faults within access points, splice closures or indoor cabling, the CS260-20 includes an integrated Visual Fault Locator (VFL, a visible red laser). Intended for single-mode optical network installation verification and troubleshooting, the CS260-20 is extremely easy to use. It provides fully automatic OTDR parameter selection, automatic event table generation and end-to-end length, loss and optical return loss (ORL) summary. For expert users, the CS260-20 also allows full control of OTDR parameters (range, pulse width, averaging time, etc.). OTDR Specifications. Emitter Type: Laser. Center Wavelengths: 1310/1550 nm ±20 nm. Dynamic Range (SNR = 1): 30/30 dB. Event Dead Zone: 0.8 m. Attenuation Dead Zone: 3.5 m. Pulse Widths: 5, 10, 30, 100, 300 ns, 1, 3, 10 ?s. Range Settings: 250 m to 240 km. Data Point Spacing: 5.0 cm (range <1.5 km), Range/30,000 (range >1.5 km). Group Index of Refraction (GIR): 1.4000 to 1.6000. Distance Uncertainty: ±(1 + 0.005 % x distance + data point spacing). Linearity: ±0.05 dB/dB VFL Specifications. Wavelength: 650 nm ±20 nm. Output Power (nominal): 0.8 mW into single-mode fiber.


Standard Calibration $325.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NOYES CS260-20. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your NOYES CS260-20 CALIBRATION and/or NOYES CS260-20 Metro/Access OTDR REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: